BDR-2208

15x Internal BD/DVD/CD Burner. Supports BDXL™ media. Cyberlink® software included. SATA interface.

  • Up to 15x writing speed on BD-R media
  • Reads and writes to BDXL media (up to 128GB on one disc)
  • Auto Quiet Mode, PowerRead™, and PureRead 2 features
  • Backwards compatible with DVD and CD media

 

Suggested Price: $109.99

Authorized Online Dealers

Buy Now

    Frequently Asked Questions for the BDR-2208

     

    1. - When installing the CyberLink software, why do I get the message "This software can only be installed with a Pioneer device.  The setup will abort."?

    Answer: The BDR-2208 must be connected to the computer through a SATA cable when installing the CyberLink software. Please ensure the BDR-2208 is connected and recognized by the operating system and then restart the software installation.  

     

    2. - Can I see the files I burned to a BDXL disc on any Blu-ray drive?

    Answer: BDXL discs can only be read on BDXL drives.  

     

    3. - Can I use the BDR-2208 with other burning/playback/editing software?

    Answer: The BDR-2208 will work with newer software in a Windows 7, Vista, or XP SP3 environment.  However, as with all current Blu-ray drives, it will not work with playback software that does not support Bus Encryption. Bus Encryption was implemented into playback software in 2011.

     

    4. - What is the Peak Power Reducer feature?

    Answer: A small percentage of computers don't provide enough power to the drive during operation.  In the case of a write operation, an error will occur, and the disc will be useless.  To prevent this, the Peak Power Reducer feature, when enabled, monitors the power and can reduce the drive's peak power to ensure a stable operation.  

     

    5. - How can I change the PureRead, Auto Quiet Mode and Peak Power Reducer settings?

    Answer: PureRead, Auto Quiet Mode, and Peak Power Reducer can be configured as well as enabled and disabled with the Pioneer BDR-2208 Drive Utility. This utility is provided on the CyberLink software disc. The utility is not automatically installed with the CyberLink software. To start the utility, go to “X:\Pioneer Drive Utilities\BDR-2208” where “X” is the drive where the Cyberlink software disc is loaded.  Ensure that the BDR-2208 is connected to the computer and then double click on “Pioneer BDR-2208 Drive Utility.exe”.

     

    6. - I started the Pioneer BDR-2208 Drive Utility. Why are all the options grayed-out and it says “Target is not found”?

    Answer: Ensure that the drive is connected and recognized by the computer before starting the utility. Ensure that the correct utility (BDR-2208) is used and not the BDR-XD04 or BDR-2207 utility. Connect the drive to the PC with a SATA and power cable and restart the BDR-2208 utility.

     

    7. - Why can’t I play Blu-ray titles or high definition copy protected content, but I can play DVDs?

    Answer: From January 1, 2012, all playback software is required to disable analog outputs from the PC for high-definition copy protected content. For such content, an HDCP display (monitor/TV) is required and it must be connected to the PC using a digital DVI (DVI-D), HDMI, or DisplayPort cable. The best way to know if a display supports HDCP is if it has HDMI inputs. The next best way is to look at the display's user manual. When playing non-copy-protected high definition video (such as home videos), or copy protected DVDs, the computer’s analog outputs are enabled and non-HDCP display systems will work. Note: This limitation is not applicable to notebook computers with built-in displays, only when using external monitors.

     

    8. - Why won't the CyberLink software work properly in Windows 8?

    Answer: If the CyberLink software disc shipped with the drive shows SR: MES110922-03 on the disc label, then a free update from CyberLink is needed for the software to work properly in Windows 8.  If the disc label has SR: MES120813-02, then the software already supports Windows 8 and nothing else needs to be done.  To download the free update, run the "CyberLink Media Suite" software by either double clicking the icon on your desktop, or single clicking the Media Suite tile. Once Media Suite is running, there will appear a row of icons at the bottom of the window.  Above the "Utilities" icon which is second from the right, there is an icon that looks like an up arrow.  Click on this arrow.  The free update for PowerDVD, Power2Go, and PowerDirector will be displayed as a green plus sign.  Click on a plus sign to download the free update.  Once you click, a website will be opened.  Click on the "Download Free Update" link near the top of the page.  When prompted, click on the "Run" button twice to install the update.  Once the update is downloaded, click the "Next" button, then "Yes" to accept the agreement, and then click on "Finish".  Close the website page, open Media Suite again, click on the up arrow and repeat to update all the software.  Note that the update for PowerDirector is large (about 770MB) and will take a while to download and install.

    Note that "Free Update" is different from "Upgrade Software".  Upgrade software is to upgrade to the lastest CyberLink software at an additional fee.  This is not needed for the software to work in Windows 8.

     

    Have additional questions? 

    Contact Pioneer Technical Support at: 800-872-4159